Print this Page

Twitter Powered – Inventor Wishlist

[ AutoCAD Wishlist | Vault Wishlist | AutoCAD WS Wishlist | Autodesk PLM 360 Wishlist ]

There is several venues already established for communicating new Inventor feature requests to Autodesk such as the official AUGI wishlist. Also, mCADForums.com has a running wishlist forum post that you can add your wish to. I wanted a different take on the wishlist, where it can be compiled from anyone using Twitter. You simply need to include the hashtag #InventorFeatureRequest in your tweet for the wish to appear on this wishlist.

Add your wish to the wishlist now using the hashtag #InventorFeatureRequest. You can also comment below on any wish already on the list.

CadSetterOut
CadSetterOut #Inventor - Auto complete when typing parameter names #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut #Inventor - Center point rectangle :) #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut Insert and place components at 0,0,0 #Inventor #InventorFeatureRequest (I can't remember if I already said that one...)
On April 27, 2011 8:48 PM via web
CadSetterOut
CadSetterOut #Inventor - Sheet set manager for Inventor #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut #Inventor - Publish command #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut #Inventor - Better interoperability with AutoCAD Blocks. One Title block/template for both #AutoCADFeatureRequest #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut #Inventor - Double click on sketch to edit it - even when in another sketch. Just like editing parts in an assembly #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut #Inventor - Save whilst in sketch mode #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut #Inventor - An easy way of getting the Length Width & Thickness from a part #InventorFeatureRequest
On April 27, 2011 8:55 PM via web
CadSetterOut
CadSetterOut The 'Open File' dialogue to remember it's size #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut The 'Parameters' dialogue to remember which nodes I had expanded #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut To be able to 'split' the feature browser window, so that the Solid, Surfaces & planes can always be seen #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut Right click on a feature in the Feature browser and choose 'Move EOP under here' #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut Projected cut edges to remember which solids were selected #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut Renaming features should respect CAPITAL LETTERS #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut Split multiple solids with one feature #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut The ability to select one part in a drawing view and show it as rendered #Inventor #InventorFeatureRequest
On April 27, 2011 8:54 PM via web
CadSetterOut
CadSetterOut The ability to pick more than one check box in the Object Visibility Drop down - or add custom filters #Inventor #InventorFeatureRequest
On April 27, 2011 8:53 PM via web
CadSetterOut
CadSetterOut Disable but show solids, like parts in assemblies #Inventor #InventorFeatureRequest
On April 27, 2011 8:53 PM via web
CadSetterOut
CadSetterOut Edit flat pattern should be easier to find #Inventor #InventorFeatureRequest
On April 27, 2011 8:53 PM via web
CadSetterOut
CadSetterOut Create hole feature on midplane #Inventor #InventorFeatureRequest
On April 27, 2011 8:53 PM via web
CadSetterOut
CadSetterOut When inserting components, right click and chose 'Insert at Origin and ground' #Inventor #InventorFeatureRequest
On April 27, 2011 8:52 PM via web
CadSetterOut
CadSetterOut A 'Go to Folded Model' Button in the Edit Flat Pattern Sheet Metal Environment #Inventor #InventorFeatureRequest
On April 27, 2011 8:52 PM via web
CadSetterOut
CadSetterOut Text Wrapping Leader Annotations #Inventor #InventorFeatureRequest
On April 27, 2011 8:51 PM via web
CadSetterOut
CadSetterOut The ability to redefine dimension parameter connection points in sketches #Inventor #InventorFeatureRequest
On April 27, 2011 8:50 PM via web
CadSetterOut
CadSetterOut Intelisense in iLogic #Inventor #InventorFeatureRequest
On April 27, 2011 8:50 PM via web
CadSetterOut
CadSetterOut A debugger in iLogic #Inventor #InventorFeatureRequest
On April 27, 2011 8:50 PM via web
CadSetterOut
CadSetterOut A way of stepping through code and examining variable values for iLogic #Inventor #InventorFeatureRequest
On April 27, 2011 8:49 PM via web
cadtoolbox
cadtoolbox #Inventor - Ability to change the color of workplanes. Think about it. #InventorFeatureRequest
On April 28, 2011 1:12 AM via web
cadtoolbox
cadtoolbox #Inventor - Add repeating table feature for dwgs (click plus for new row) #InventorFeatureRequest
On April 28, 2011 1:11 AM via web
cadtoolbox
cadtoolbox #Inventor - Ability to merge rows in a dwgs table #InventorFeatureRequest
On April 28, 2011 1:11 AM via web
cadtoolbox
cadtoolbox #Inventor - Ability to pull iProps for dwg sketched symbols from specific views (multi-part dwgs) #InventorFeatureRequest
On April 28, 2011 1:11 AM via web
cadtoolbox
cadtoolbox #Inventor - Expose drawing sheet rev property directly to API #InventorFeatureRequest
On April 28, 2011 1:11 AM via web
cadtoolbox
cadtoolbox Allow attached #Inventor simulation files in vault to be hidden by default #InventorFeatureRequest #VaultFeatureRequest
On April 28, 2011 1:11 AM via web
cadtoolbox
cadtoolbox Allow pasted sketch symbols from #Inventor dwg to not copy in attached styles to new dwg #InventorFeatureRequest
On April 28, 2011 1:10 AM via web
cadtoolbox
cadtoolbox Streamline process for style library updates and requirement of having to update each #Inventor template file #InventorFeatureRequest
On April 28, 2011 1:10 AM via web
cadtoolbox
cadtoolbox Allow users to create child templates w/ overrides or additions based on master templates. #InventorFeatureRequest
On April 28, 2011 1:10 AM via web
cadtoolbox
cadtoolbox Integrate iPropWiz into #Inventor directly. #InventorFeatureRequest
On April 28, 2011 1:10 AM via web
cadtoolbox
cadtoolbox When will #Inventor support ASME Y14.5 2009? #InventorFeatureRequest
On April 28, 2011 1:09 AM via web
cadtoolbox
cadtoolbox An official @Autodesk App Store for all #Inventor #autocad add-ins - #InventorFeatureRequest #AutoCADFeatureRequest
On April 28, 2011 1:09 AM via web
cadtoolbox
cadtoolbox Wish we could catalog by #Inventor function all the good blog posts, YouTube vids & Twitter tips, Links on wikihelp? #InventorFeatureRequest
On April 28, 2011 1:07 AM via web
hi_D_Robot
hi_D_Robot RT @cadtoolbox: Wish we could catalog by #Inventor function all the good blog posts, YouTube vids & Twitter tips, Links on wikihelp? #InventorFeatureRequest
On April 30, 2011 2:01 PM via web
cadtoolbox
cadtoolbox @mflayler - a dumb down method would be nice, or toggle switch for simulated and modeled threads #InventorFeatureRequest
On May 3, 2011 7:15 PM via Twitter for iPhone
CadSetterOut
CadSetterOut The ability to select individual bodies within parts and change the edge visibility/linetype in drawings #InventorFeatureRequest
On May 4, 2011 8:34 AM via web
CadSetterOut
CadSetterOut See through Glass on drawings (even if it is not technically correct to ISO standards) #InventorFeatureRequest
On May 4, 2011 8:33 AM via web
cadtoolbox
cadtoolbox #Inventor Content Center - Hide part families individually in default read only libraries, for co. standards #InventorFeatureRequest
On May 4, 2011 12:28 PM via Twitter for iPhone
cadtoolbox
cadtoolbox #Inventor Content Center - Ability to generate all members in a family in batch. #InventorFeatureRequest
On May 4, 2011 12:25 PM via Twitter for iPhone
cbashor
cbashor AGREED! RT @cadtoolbox: #Inventor Content Center - Ability to edit category images after they are created. #InventorFeatureRequest
On May 4, 2011 12:23 PM via TweetDeck
cadtoolbox
cadtoolbox #Inventor Content Center - Ability to edit category images after they are created. #InventorFeatureRequest
On May 4, 2011 12:22 PM via Twitter for iPhone
cadtoolbox
cadtoolbox #Inventor Content Center Day - Ability to create new parent categories in read/write libraries. #InventorFeatureRequest
On May 4, 2011 12:20 PM via Twitter for iPhone
CadSetterOut
CadSetterOut #Inventor The ability to derive master part sketches into assembly sketches #InventorFeatureRequest
On May 5, 2011 8:25 AM via web
CadSetterOut
CadSetterOut #Inventor Parts list filters could be available from the Insert Parts List Dialogue. That would save a few clicks #InventorFeatureRequest
On May 9, 2011 2:26 PM via web
cadtoolbox
cadtoolbox #Inventor wish: Place the Parameters command on the Model ribbon toolbar by default #InventorFeatureRequest
On May 10, 2011 11:40 AM via Twitter for iPhone
cadtoolbox
cadtoolbox #Inventor wish: Ability to render a part or assembly with FEA results overlay #InventorFeatureRequest
On May 11, 2011 2:50 PM via Twitter for iPhone
CadSetterOut
CadSetterOut #Inventor The ability to override the offset value for Individual dimension extension lines #InventorFeatureRequest http://cadso.co/mQkj2D
On May 13, 2011 8:01 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest Add feature depth 2 DXF layer name on flat pattern export #Inventor needs a good way 2 create nonSheetMetal cutfiles
On May 25, 2011 7:56 AM via web
CadSetterOut
CadSetterOut #InventorFeatureRequest - Get rid of the 'Drawing updates are deferred' prompts. They are self obsolete...
On May 25, 2011 7:33 AM via web
cadtoolbox
cadtoolbox @AutodeskMFG - so many apps in the new suites, we need a windows update type tool for service packs and hotfixes. #InventorFeatureRequest
On May 25, 2011 1:52 PM via Twitter for iPhone
cadtoolbox
cadtoolbox When copy/paste a sketched symbol w/ prompted entries, #Inventor should not reprompt you for the symbol you copied #InventorFeatureRequest
On May 26, 2011 12:34 PM via Twitter for iPhone
cadtoolbox
cadtoolbox When moving the #Inventor end of part up in the tree the parameters should grey out that are beyond the end of part #InventorFeatureRequest
On June 13, 2011 1:54 PM via Twitter for iPhone
ScottMoyse
ScottMoyse An intersection snap point/constraint in the sketch environment would be nice #InventorFeatureRequest
On June 16, 2011 10:30 AM via web
ScottMoyse
ScottMoyse @CadSetterOut Defer updates in idw should be a button and not buried in the document settings dialogue. #InventorFeatureRequest
On June 16, 2011 10:26 AM via web
CadSetterOut
CadSetterOut Different OSNAP markers for end points, mid points etc. #InventorFeatureRequest
On June 16, 2011 10:08 AM via web
CadSetterOut
CadSetterOut Opening drawings with deferred update could be better (ie. Should be Instant!) No warning is required! #InventorFeatureRequest
On June 16, 2011 7:27 AM via web
cadtoolbox
cadtoolbox RT @ScottMoyse: wish inplace created parameters were created as user parameters, instead of model parameters - #InventorFeatureRequest
On June 15, 2011 10:35 AM via Twitter for iPhone
CadSetterOut
CadSetterOut Any programming Guru's care to comment! http://t.co/EhBaE0Y #InventorFeatureRequest #API Envelope, 3D Range Box, Extents
On June 22, 2011 1:11 PM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest Automatic Length Width & Depth/Thickness iProperty generator for non planar & irregular parts. http://t.co/u3AdV2C
On June 22, 2011 11:26 AM via web
ScottMoyse
ScottMoyse RT @CadSetterOut: Any programming Guru's care to comment! http://t.co/EhBaE0Y #InventorFeatureRequest #API Envelope, 3D Range Box, Extents
On June 22, 2011 7:54 PM via web
JohnEvansDesign
JohnEvansDesign RT @MFG_3D: RT @cadtoolbox: Stack up calculator for GD&T #InventorFeatureRequest
On June 30, 2011 3:45 PM via Seesmic twhirl
MFG_3D
MFG_3D RT @cadtoolbox: Stack up calculator for GD&T #InventorFeatureRequest
On June 30, 2011 2:59 PM via Twitter for iPhone
cadtoolbox
cadtoolbox Stack up calculator for GD&T #InventorFeatureRequest
On June 30, 2011 2:58 PM via Twitter for iPhone
ScottMoyse
ScottMoyse RT @CadSetterOut: @ScottMoyse and numbers should sort too (everywhere!) 10 does not come after1! #InventorFeatureRequest
On June 29, 2011 10:48 AM via web
CadSetterOut
CadSetterOut @ScottMoyse and numbers should sort too (everywhere!) 10 does not come after1! #InventorFeatureRequest
On June 29, 2011 10:38 AM via web
ScottMoyse
ScottMoyse Why aren't Parameters sorted alphabetically in the Derive dialogue box? They should be #InventorFeatureRequest
On June 29, 2011 10:19 AM via web
CadSetterOut
CadSetterOut In-line Work feature Visibility to be toggled on and off by the top level feature #InventorFeatureRequest
On June 28, 2011 11:26 AM via web
MFG_3D
MFG_3D Mini Toolbar for Sheet Metal Commands #InventorFeatureRequest
On July 1, 2011 1:41 PM via TweetDeck
haubert
haubert RT @cadtoolbox: 80 Tweet #Inventor wishes on the wishlist now: http://t.co/TDlHo6j -- Add yours with the hashtag #InventorFeatureRequest
On June 30, 2011 10:07 PM via web
cadtoolbox
cadtoolbox 80 Tweet #Inventor wishes on the wishlist now: http://t.co/TDlHo6j -- Add yours with the hashtag #InventorFeatureRequest
On June 30, 2011 9:04 PM via web
CadSetterOut
CadSetterOut Overlay views for drawing section views #InventorFeatureRequest
On July 6, 2011 10:28 AM via web
MFG_3D
MFG_3D Preview the export of a sheet metal flat in the Layers tab of the Flat Pattern Export Options Dialog #InventorFeatureRequest
On July 5, 2011 10:32 PM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest @AutodeskMFG support for retrieving driven dimensions with 'Retrieve Dimensions' on drawing views
On July 6, 2011 9:57 PM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest sweep along a path and "from/to" between planes, features or faces etc.
On July 6, 2011 11:52 PM via web
ScottMoyse
ScottMoyse @MFG_3D so too many steps really! #InventorFeatureRequest extrude 3D sketch along a vector like #Solidworks can.
On July 6, 2011 11:51 PM via web
MFG_3D
MFG_3D This would be good, it only can be done in the Loft command RT @ScottMoyse #InventorFeatureRequest extrude 3D sketch along a vector like
On July 7, 2011 2:19 PM via web
CadSetterOut
CadSetterOut @MFG_3D iLogic desperately needs a debugger. And intellesense wouldn't go amiss either ;) #iLogicFeatureRequest #InventorFeatureRequest
On July 8, 2011 6:34 PM via web
chrissoathe
chrissoathe RT @MFG_3D: #inventorFeaturerequest debug button for iLogic code in rule editor (one line debugger)
On July 8, 2011 5:38 PM via TweetDeck
MFG_3D
MFG_3D #inventorFeaturerequest debug button for iLogic code in rule editor (one line debugger)
On July 8, 2011 5:36 PM via TweetDeck
CadSetterOut
CadSetterOut The ability to show a different level of detail in a Detail or Section view, to the parent view #InventorFeatureRequest
On July 8, 2011 10:59 AM via web
CadSetterOut
CadSetterOut RT @ScottMoyse: #InventorFeatureRequest support 4 derived references in the Inventor Copy component/assembly command! Sloppy work from Autodesk shud b there
On July 19, 2011 11:02 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest support 4 derived references in the Inventor Copy component/assembly command! Sloppy work from Autodesk shud b there
On July 19, 2011 10:56 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest The ability 2 use Assemblies & iAssemblies in Libraries without constant save issues due 2 part file path changes
On July 19, 2011 6:18 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest the ability 2 use parameters local to the active assembly when placing custom iParts & custom iAssemblies! #Inventor
On July 19, 2011 11:49 AM via web
cadtoolbox
cadtoolbox Would be nice to get some of this flexibility with the standard Inventor deployment installer: http://t.co/2Mg4hQ3 #InventorFeatureRequest
On July 26, 2011 10:58 AM via web
seansumodate
seansumodate RT @ScottMoyse: #InventorFeatureRequest Export to Inventor Publisher as a Dumb model. So Inventor users can view their models in #InventorPublisherMobile
On July 28, 2011 8:28 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest Export to Inventor Publisher as a Dumb model. So Inventor users can view their models in #InventorPublisherMobile
On July 28, 2011 8:26 AM via web
CadSetterOut
CadSetterOut Hmmm, 'Add to accumulate' in #Inventor 2010 measure tool is pants. Please make it better! #InventorFeatureRequest
On September 19, 2011 9:11 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest PLS Replace the useless Windows property columns in the File Open dialogue 'details' view with INV iProperty Columns
On October 18, 2011 8:19 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest Find & Replace tool in the Parameters dialogue box, anywhere would be good. Cheers @autodesk!
On October 18, 2011 7:52 AM via web
ScottMoyse
ScottMoyse RT @cadtoolbox: Roll up features in an #Inventor part to a folder (aka Design Element) #InventorFeatureRequest
On October 17, 2011 7:12 PM via Twitter for iPhone
cadtoolbox
cadtoolbox Roll up features in an #Inventor part to a folder (aka Design Element) #InventorFeatureRequest
On October 17, 2011 7:00 PM via Twitter for iPhone
cadtoolbox
cadtoolbox Join and cut in the same #Inventor feature operation --- #InventorFeatureRequest
On October 17, 2011 6:33 PM via Twitter for iPhone
cadtoolbox
cadtoolbox New blog post: "Inventors new and improved text editor is a GOST" -- http://t.co/gkdBI9ZN #Inventor #InventorFeatureRequest
On October 14, 2011 12:21 PM via Twitter for iPhone
CadSetterOut
CadSetterOut RT @ScottMoyse: @CadSetterOut #InventorFeatureRequest Make Add Model Dimensions work with Multi Body modelling & Reference dimensions
On November 15, 2011 8:08 AM via web
ScottMoyse
ScottMoyse @CadSetterOut #InventorFeatureRequest Make Add Model Dimensions work with Multi Body modelling & Reference dimensions
On November 15, 2011 7:59 AM via web
cadtoolbox
cadtoolbox Ability to merge rows in the #Inventor drawing table editor.... #InventorFeatureRequest
On November 14, 2011 8:08 PM via web
CadSetterOut
CadSetterOut #InventorFeatureRequest #iLogic design copy - Copy folder structure option.
On February 29, 2012 9:25 AM via web
CadSetterOut
CadSetterOut #InventorFeatureRequest #iLogic design copy - Find & Replace text strings in the part name option.
On February 29, 2012 9:25 AM via web
ScottMoyse
ScottMoyse Pattern Thicken Feature #InventorFeatureRequest
On April 14, 2012 2:15 AM via web
ScottMoyse
ScottMoyse Just realised there's no Bi-directional option for rectangular pattern in #AutodeskInventor sketch environment!?!?! #InventorFeatureRequest
On April 14, 2012 2:10 AM via web
ScottMoyse
ScottMoyse #InventorFeatureRequest Pls add a change manager 2 the new Materials & Appearances Libraries. I cant c which 1 has changed or needs updating
On July 18, 2012 4:58 AM via web

Permanent link to this article: http://cadtoolbox.com/inventor-wishlist/

1 comment

2 pings

  1. Oleg_inv

    May 23, 2011 at 2:36 PM (UTC -5) Link to this comment

    Reply

    Full functional TABLES in Drawing manager. Same as in AutoCAD.

  1. CADToolbox.com » The new Inventor wish list

    April 6, 2011 at 9:14 PM (UTC -5) Link to this comment

    Reply

    [...] View the Inventor Wishlist ] (Beta) VN:F [1.9.8_1114]please wait…Rating: 0.0/5 (0 votes [...]

  2. Autodesk Inventor Bugs, Moans & Gripes!

    September 6, 2011 at 2:28 PM (UTC -5) Link to this comment

    Reply

    [...] out the Twitter Powered – Inventor Wishlist [...]

Leave a Reply

Your email address will not be published. Required fields are marked *

2,084 Spam Comments Blocked so far by Spam Free Wordpress